Machine embroidery with metallic thread
Metallic thread is often extremely troublesome to work with, for anyone who is continuously having thread breaks it is very annoying and may result in your project taking a lot longer to complete than you had thought. Here are a few ideas on methods to lessen the thread breaks when embroidery design downloadswith metallic thread. Be sure you are using top quality, well taken care of metallic thread. If you work with cheap, old or dried out thread it’ll break more frequently, check that the thread is smooth by running through your fingers. Always slow the machine down when you’re using metallic thread. It’ll actually save you time because you won’t be required to constantly manage thread breaks.
Select a design that’s well suited for stitching in metallic thread. If theembroidery design downloads was digitized for metallic thread the digitizer might have suggested a particular brand of thread. Be sure you are using the correct size needle for your thread and that the needle is in good condition, if your metallic thread is a bit thicker than standard thread you’ll need to make use of a bigger needle.
Given that metallic embroidery thread kinks and loops a lot more than standard thread this produces added tension as it passes through the thread guide, this can cause shredding and breaking. The use of a thread stand which is designed to smooth the thread is a good idea. Heavier stiff closely weaved fabric and stabilizers aren’t recommended when using metallic thread as they can remove the metallic layer from the thread.Check your machine tension; Ensure your thread tension isn’t to tight. Be sure to have no abrasive edges or burs on needles and the needle plate.Don’t use sticky backing or adhesives, the adhesive can build up on the needle and create drag which stops smooth sewing
